How to Remove Greasy Fingerprints from Car Paint: 5 Easy Methods

Fingerprints will sit on the glossy car paint. They won’t trouble you much, but greasy fingerprints are very concerning. Do you already put a greasy fingerprint on your car? We don’t want to say, but you have made a big mistake. It looks ugly, and you cannot remove it very fast with just a wipe. 

It might not be a fast method, but many easy ways exist to clean this mess. This article will describe how to remove greasy fingerprints from car paint with five easy methods. Then you can have it looking like new. Mind it: It is grease, and you will work on the paint. Don’t do anything that damages your car paint.

How to Make A Quick Detail in Your Car?

People are always touched when they see a new car. You want to feel those cars when you go to a supercar shop. It is a human habit. Usually, we have some sensitive fingers, and we can’t regret it. But most cars are painted with glossy paint. So, they leave a lot of fingerprints when you try to feel the car.

Fingerprints detract from the beauty of a shiny car’s paint. Since these fingerprints won’t be challenging to remove, you can quickly detail your vehicle. How do you clean a car like brand new by removing touchy fingerprints? Here are the tips.

Now the first thing is first. It would be best if you had a Quick detailer to do this job first. Here, we pick Masterson’s Detail Spray, which comes with excellent cleaning formula. It removes fingerprints, dirt, dust, and light dirt and restores your car wax like a new one. Let’s tell you how you do it.

• Spray the area where you want to clean the fingerprints.
• Take a microfiber towel.
• Wipe that towel in one direction from one side where you sprayed.
• Then give a light bluff over the surface. It will provide a final finish.

By the way, it is a water-based cleaner. You can clean your car indoors also with this detailer. You don’t know how people feel curious in an auto show. People become crazy when they see their dream cars in front of them. They cannot prevent them from touching. 

In this video, Greg will tell you about people’s madness. However, he also shows the detailing practically. You can check if you like that new Porsche. 

What is Concerning in Greasy Fingerprints?

It is a must-do thing to remove greasy fingerprints from your car’s paint as it can cause damage to your car’s surface paint.

• Fingerprints can cause scratches to the surface of the car’s paint.
• If they left for a long time, they might have changed the original color of the car’s paint.
• Excessive rubbing to remove fingerprints can cause it to peel off the car paint.
• If left for a long time, car paint can get softened, which can cause severe damage.

5 Easy Methods to Remove Greasy Fingerprints from Car Paint 

In this section, you will explore those five methods to remove greasy fingerprints from a car. Hey, don’t let your car paint damage. So, be careful and follow any methods you like in the way we have said.

1. Car Washing Shampoo

This method is cheaper and easier than the other methods. It can easily dissolve the stains, grease, or oil, whatever is disturbing the looks of your car. While rinsing it off with cloth and water, try to use clean water. Don’t worry; if you use good-quality car shampoo, it won’t discolor the surface. Moreover, it is widely available everywhere. 

Read More: How to fix burnt paint on the car.

How to use

• Mix a scoop of car wash shampoo with water.
• Dip a sponge into the mixer.
• Gently scrub off the stained area with the sponge.
• Rinse it off with water.
• Repeat if necessary.

2. Melamine Foam

One of the most effective methods to remove greasy fingerprints and is also the cheapest. These foams are most effective in removing every single stain. They are a soft and easy item. So, don’t push hard over the paint. That’s unnecessary. It is 100% safe to use.

How to use

• Apply some water to the melamine foam.
• Gently scrub off the stained area with the foam.
• Rinse it off with water.
• Repeat if necessary.

3. Degreaser Spray

Degreaser sprays are specially made to remove different types of sticky substances. They are also widely available to the market. You have to pick the market’s best Degreaser. Otherwise, a normal one can discolor the paint. Meguiar’s A3016EU Deep Crystal is our favorite. It can remove tough grease fingerprints from any surface, especially the car. 

How to use

• Spray the Degreaser on the stained area.
• Allow it to sit for 2 minutes.
• Remove it with any non-abrasive tool, such as a soft brush.
• Rinse it off with water.

4. Clay Bar

Using a clay bar is one guaranteed method to remove greasy fingerprints on the car. You need a clay bar lubricant with to use. That helps the clay bar to work efficiently. You can apply it on any small surface. 

How to use

• Rub the clay bar against the stained surface.
• Rub until all the dirt gets trapped in the clay bar.
• For more efficiency, use it with a clay bar lubricant.

5. WD-40 Spray

Though all the above methods are proven to remove grease from car surfaces, sometimes none of them worked. Then we have left only one way to apply. When all other methods fail to remove grease fingerprints, we will look for WD-40 Spray. This is our last hope, and it won’t disappoint us. 

While using it, you will be surprised for sure because of its performance. It is a little bit costlier than the above methods. 

How to use

• Apply a small quantity of WD-40 Spray to the stained area.
• Remove it with a microfiber towel or any non-abrasive tool such as a soft brush.
• Rinse it off with water.

What You’ll Need

Before you begin, gather the following supplies:

1. Car Wash Soap: Choose a high-quality car wash soap that is gentle on the paint.
2. Microfiber Cloths: These are essential for preventing scratches on the paint.
3. Bucket: For mixing the soapy solution.
4. Hose or Pressure Washer: To rinse the car.
5. Automotive Wax: To protect the paint after cleaning.
6. Water: For diluting the soap and rinsing.

Step-by-Step Guide

Follow these steps to remove greasy fingerprints from your car’s paint:

Step 1: Choose the Right Location

Select a shaded area to work on your car. Direct sunlight can cause the soapy water to dry quickly, leaving behind streaks.

Step 2: Prepare the Soapy Solution

Fill a bucket with water and add the recommended amount of car wash soap. Mix it well to create a soapy solution.

Step 3: Rinse the Car

Before washing, use a hose or pressure washer to rinse the entire car. This will help remove loose dirt and debris, reducing the risk of scratching the paint during cleaning.

Step 4: Wash the Affected Area

Dip a clean microfiber cloth into the soapy solution and gently wash the area with greasy fingerprints. Use a circular motion, applying slight pressure. Avoid using excessive force to prevent scratches.

Step 5: Rinse Thoroughly

After cleaning the affected area, rinse it thoroughly with clean water. Ensure that all soap residue is removed.

Step 6: Dry the Car

Use a separate dry microfiber cloth to gently dry the washed area. Pat the surface rather than rubbing to prevent any potential scratches.

Step 7: Apply Automotive Wax

Once the car is dry, apply automotive wax to the entire vehicle, including the area where you removed the fingerprints. Waxing helps protect the paint and adds a layer of shine.

Step 8: Buff the Wax

Follow the wax manufacturer’s instructions for buffing the wax to a glossy finish. Typically, this involves using a clean, dry microfiber cloth and circular motions.

Additional Tips

• Act Quickly: The sooner you address greasy fingerprints, the easier they are to remove. Don’t let them sit for too long.
• Avoid Harsh Chemicals: Do not use strong solvents or abrasive cleaners, as they can damage the paint.
• Regular Maintenance: To prevent future fingerprints, maintain a regular cleaning and waxing schedule for your car.

Final Verdict

Removing the greasy fingerprints from your car as soon as you notice is best to prevent severe damage to your car paint. This article has tried to show the easiest way to remove greasy fingerprints from car paint. Also, we have recommended some products already available for this job. Hopefully, you can solve it with the help of this guide. 

If you find this article helpful, share it with your friend who is in the same problem. If you have any questions, leave them in the comment. We try to answer.